Annual Boiler Servicing Contracts
All annual services are carried out to a standard schedule unless instructed otherwise.
Our engineer will ask you about the performance of the appliance and if you have any problems.
If the manufacturers instructions are available these would be consulted.
Our service will include:
- Isolate the gas and electrical supply to the appliance
- Dismantle the appliance to gain access to the combustion area and controls
- Inspection and clean.
We will check:
- The heat exchanger surface
- The main burner
- The pilot burner
- The fan, removing any dust from impeller
We will:
- Check and replace where necessary all safety devices
- Check all water, electrical and gas connections for soundness and safety
- Check flueways and air intake ducts and flue terminal
- Check and confirm ventilation requirements
- Carry out a flue flow test and spillage test if appliance is open flued
- Check burner gas pressure or heat input against manufacturers data
- Check all combustion chamber seals for soundness
- Check stability of appliance and any retaining devices
- Check the working gas pressure
- Carry out Efficiency test on boiler
